Platelet rich fibrin and MTA in the treatment of teeth with open apices.

BACKGROUND: The present study aimed to evaluate the effectiveness of using platelet-rich fibrin (PRF) as the apical matrix for the placement of MTA in nonsurgical endodontic therapy for teeth with periapical lesions and open apices. METHODS: Twelve teeth from eleven patients with periapical periodontitis and open apices were enrolled in the study. Nonsurgical endodontic therapy was performed with the PRF used as an apical barrier and the MTA manipulated as an apical plug for further thermoplasticized gutta percha in the remaining part of the root canal. Clinical signs and periapical digital radiographs were recorded and analyzed to evaluate the curing progress after periodical follow-ups of 1, 3, and 6 months. The horizontal dimension of the periapical lesion was determined, and the changes in the dimensions were recorded each time. The Friedman test was used for statistical analysis, with P < .05 serving as the threshold for determining statistical significance. RESULTS: All patients had no clinical symptoms after the first month of treatment, with a significant reduction in the periapical lesion after periodical appointments. CONCLUSIONS: PRF is an effective barrier when combined with MTA for the treatment of teeth with periapical periodontitis and open apices.

Measurement of the apical anatomy of immature maxillary central incisors using cone-beam computed tomography.

OBJECTIVE: To investigate the CBCT findings of the apical anatomy of immature maxillary central incisors. METHODS: CBCT images of 100 immature maxillary central incisors in Nolla 8 and 100 immature maxillary central incisors in Nolla 9 were collected. The mesiodistal and carniocaudal diameters of the apical foramen of immature maxillary central incisors were measured by software included with CBCT, as well as the mesiodistal, carniocaudal and facioligual diameters of the apical shadow. The apical shadow and apical foramen diameters were compared between Nolla 8 and Nolla 9. Data were analyzed using the MedCalc software package. RESULTS: For immature maxillary central incisors, the mesiodistal and facioligual diameters of the apical foramen were 2.75±0.68 mm and 3.28±0.74 mm in Nolla 8 and 1.50±0.51 mm and 1.92±0.79 mm in Nolla 9. The mesiodistal, facioligual and carniocaudal diameters of the apical shadow were 3.84±0.73 mm, 4.49±0.68 mm and 3.41±1.27 mm in Nolla 8 and 2.76±0.60 mm, 3.41±0.80 mm and 2.06±0.65 mm in Nolla 9, respectively. CONCLUSIONS: The immature maxillary central incisors in Nolla 8 have a larger apical shadow and apical foramen than those in Nolla 9. The apical region of the maxillary central incisors in Nolla 8 was more likely to have a broad, blurred lamina dura. With the development of the apical foramen, the lamina dura in the apical region tended to be clear and sharp. CLINICAL SIGNIFICANCE: To our knowledge, this is the first study to radiologically analyse the in vivo anatomy of the apical foramen and apical shadow of immature maxillary central incisors. The results of this study provide a more detailed understanding of the apical anatomy of the immature maxillary central incisor for the diagnosis and treatment of apical lesions.

In Vitro Comparison of the Accuracy of Cone-Beam Computed Tomography Scanning and Electronic Apex Locators in Detection of Simulated Root Perforations in Different Localizations.

INTRODUCTION: This study aimed to compare the accuracy of cone-beam computed tomographic (CBCT) scanning and 2 different electronic apex locators (EALs) in the detection of simulated root canal perforations in different localizations. METHODS: Eighty human mandibular premolars were prepared and divided into 2 groups according to the localization of the perforation area, having a 1-mm diameter. The distance between the occlusal edge and the beginning of the perforation was measured under a stereomicroscope (actual working length) using 2 EALs (Propex II [Dentsply Maillefer, Ballaigues, Switzerland] and Dentaport ZX [J. Morita, Tokyo, Japan]) (electronic working length) and CBCT images (CBCT working length). The calculations were made by subtracting the actual working length from the electronic working length and the CBCT working length to determine the differences. RESULTS: In the apical third perforation group, there was a significant difference between Dentaport ZX and CBCT imaging. There was no significant difference between Dentaport ZX and Propex II and Propex II and CBCT measurements. In the middle third perforation group, Propex II was significantly more successful than CBCT imaging. In addition, there was no significance between the accuracy of Propex II in detecting the perforation area between the apical third perforation group and the middle third perforation group. CBCT imaging was more accurate in detecting the perforation area in the apical third perforation group than in the middle third perforation group. CONCLUSIONS: In cases in which the root canal perforation was in the apical third of the root, both the EAL and CBCT imaging were successful in determining the perforation area, whereas the success rate of all devices used in this study decreased when the perforation area was in the middle third of the root.

Relación entre el seno maxilar y ápices de dientes postero- superiores con tomografía computarizada de haz cónico / Relationship between the maxillary sinus and apices of posterior-superior teeth using cone beam computed tomography

El conocimiento de la relación entre el seno maxilar y los ápices de los dientes posterosuperiores es fundamental para evitar complicaciones frente a distintos tratamientos. Estudio descriptivo de corte transversal, con muestra por conveniencia de 383 imágenes de raíces de dientes posterosuperiores obtenidas por medio de tomografía computarizada de haz cónico (TCHC) de un centro radiológico en Viña del Mar, Chile. Cada raíz fue clasificada según su relación vertical con el seno en 4 categorías (0: ápice no se encuentra en contacto con contorno inferior del seno; 1: ápice en contacto con seno; 2: ápice lateralmente al seno; 3: ápice se protruye en seno). Además se midió su distancia en mm. Los datos fueron analizados con estadística descriptivas. El diente más lejano al seno maxilar fue el primer premolar superior (4.2 mm), seguido por el segundo premolar superior (1 mm). En el primer molar superior la raíz más lejana fue la mesio-vestibular (MV) 1mm, seguida por la raíz disto-vestibular (DV) 0.6mm y la raíz palatina (P) -1mm. En el segundo molar superior la raíz más lejana fue P 0.4mm, luego la DV 0.3mm, y MV -0,11mm. En cuanto a las categorías, se observó que la mayoría de las raíces se encuentran alejadas del seno siendo la raíz P del primer molar superior y la raíz MV del segundo molar superior las que se encuentran mayormente protruidas (42 % y 26 % respectivamente). El primer premolar es el diente posterosuperior que se encuentra más alejado del seno maxilar y a medida que se avanza hacia posterior hay tendencia a disminuir la distancia entre los ápices y el seno maxilar.

SUMMARY: Knowledge of the relationship between the maxillary sinus and the apices of the upper posterior teeth is crucial to avoid complications when considering different treatments. A descriptive cross-sectional study was carried out, with a convenience sample of 383 images of upper posterior teeth roots, obtained by means of cone beam computed tomography (CBCT) from a radiological center in Viña del Mar, Chile. Each root was classified according to its vertical relationship with the sinus into 4 categories (0: apex is not in contact with the lower contour of the sinus; 1: apex is in contact with the sinus; 2: apex laterally to the sinus; 3: apex protrudes in sinus). In addition, its distance was measured in mm. The data were analyzed with descriptive statistics. The tooth farthest from the maxillary sinus was the maxillary first premolar (4.2 mm), followed by the maxillary second premolar (1 mm). In the upper first molar, the most distant root was the mesiobuccal (MV) 1mm, followed by the distobuccal root (DV) 0.6mm and the palatal root (P) -1mm. In the upper second molar, the furthest root was P 0.4mm, then DV 0.3mm, and MV -0.11mm. In reference to the categories, it was observed that most of the roots are far from the sinus, with the P root of the first upper molar and the MV root of the second upper molar being the most protruding (42 % and 26 % respectively). The first premolar is the posterior maxillary tooth that is furthest from the maxillary sinus and as one advances posteriorly there is a tendency to decrease the distance between the apices and the maxillary sinus.

Effect of foraminal enlargement on microcrack formation and apical transportation: a nano-CT assessment.

The aim of this study was to evaluate the foraminal enlargement and its influence on microcrack formation and apical transportation in root canals with apical curvature. Eighteen maxillary lateral incisors with apical curvature were selected by using micro-CT images. Root canals were randomly divided in two groups (n = 9) according to root canal preparation using two working lengths: 1 mm short of the apical foramen (control group) and 1 mm beyond the apical foramen (foraminal enlargement). For both groups Reciproc Blue R40 was used for root canal instrumentation. Specimens were scanned by nano-CT (UniTOM HR) before and after root canal preparation. Percentage, length, and width of microcracks, and apical transportation were assessed. Kappa, chi-square and McNemar tests were used for qualitative analyses while paired and unpaired t-test were used for quantitative analyses (α = 0.05). For both groups, rather similar and low percentages of microcracks were observed before root canal preparation (P > 0.05). The foraminal enlargement promoted new microcracks, not observed in the control group. An increase in microcrack length was observed when the foraminal enlargement was performed (P < 0.05). Higher apical transportation was observed when foraminal enlargement was performed (P < 0.05). Foraminal enlargement using a heat-treated reciprocating file size 40 promoted microcracks and higher apical transportation than root canal preparation up to 1 mm short of apical foramen.

Clinical Accuracy and Precision of 3 Multifrequency Electronic Apex Locators Assessed through Micro-Computed Tomographic Imaging.

INTRODUCTION: This study aimed to compare the in vivo accuracy and precision of 3 electronic apex locators (EALs) in determining the position of the major foramen using micro-computed tomographic (micro-CT) technology. METHODS: After access preparation of 23 necrotic or vital teeth from 5 patients, canals were negotiated, and hand files were used to determine the position of the foramen with 3 EALs: Propex Pixi (Dentsply Maillefer, Ballaigues, Switzerland), Woodpex III (Woodpecker Medical Instrument Co, Guilin, China), and Root ZX II (J Morita, Tokyo, Japan). After fixing the silicon stop to the file, teeth were extracted and scanned in a micro-CT device with and without the instrument inserted into the canal. Data sets were coregistered, and the accuracy and precision of the EALs were determined at a tolerance level of ±0.5 mm by measuring the distance from the tip of the instruments to a tangential line crossing the margins of the foramen. Statistical comparisons were performed using Friedman with post hoc related samples sign and Spearman tests (α = 5%). RESULTS: A significant difference was detected comparing the accuracy of Root ZX II (100%), Woodpex III (86.96%), and Propex Pixi (52.17%) (P < .05). There was a lack of significance in the relationship between the pulp status and the accuracy of the tested EALs (P > .05). Propex Pixi was significantly less precise than Root ZX II (P < .05), whereas no difference was found between Woodpex III and Root ZX II or Propex Pixi (P > .05). CONCLUSIONS: EALs presented similar precision, but Woodpex III and Root ZX II showed better accuracy to determine the position of the apical major foramen than Propex Pixi.

Evaluation of rotary instruments with whipping motion in the biomechanical preparation of large root canals of young permanent teeth.

Shaping ability evaluation of taper ./01 instruments in large root canals, by microcomputed tomography (micro-CT) and scanning electron microscopy (SEM). Maxillary central incisors with large diameter root canals were divided into two groups (n = 10): XP-Endo Shaper (FKG-Dentaire, Switzerland) and manual instrumentation (FKG-Dentaire). Two- and three-dimensional parameters from cervical to apical root thirds were evaluated by micro-CT. Apical stop was evaluated by SEM images. Data were analysed by ANOVA and Tukey tests (α = 5%). XP-Endo Shaper allowed a regular biomechanical preparation with less dentinal wear compared with manual instrumentation, which showed excessive wear of the thin root canal walls (p < 0.05). Roundness and SMI showed similarity between both protocols (p > 0.05). XP-Endo Shaper SEM showed a regular and well-defined shape of the apical foramen suggesting the formation of the apical stop. Reduced diameter and taper instruments promoted a conservative wear and a well-defined apical stop formation in large root canals.

Variations in the morphology of apical constriction affecting electronic readings: An in vitro investigation using 3D-printed tooth models.

We investigated the interference of apical constriction position and diameter on the accuracy of electronic apex locators using 3D-printed tooth models. Single-rooted tooth models with the same length, canal taper and major foramen, but variation in apical constriction position or size, were designed and 3D-printed. A mounting model was custom-made for precise measurement of both marks (0.5 and APEX/0.0) of two electronic apex locators. The electronic measurements of both devices were correlated significantly to the major foramen rather than apical constriction. The mean measurements of the group with 0.45 mm in apical constriction width were significantly shorter than those of the other groups for both marks of the two devices (p < 0.05). The variations in apical constriction position and width negatively affected the precision of the 0.5 mark of the tested devices. The 0.0 or APEX mark was consistently located the major foramen.

Influence of Apical Diameter on Filling Material Extrusion during Retreatment - A Micro-CT and CBCT evaluation.

AIM: To investigate whether foraminal widening performed at primary treatment has an effect on the amount of apically extruded obturator material during retreatment and to evaluate the sensitivity of cone beam computed tomography (CBCT) in detecting extruded obturator material. METHODS: Forty palatal roots of maxillary molars were selected based on micro-CT and divided into two groups (n=20): with foraminal widening (WE) and without foraminal widening (NE). To standardize the apical foramen, all specimens were instrumented to the foramen using the Protaper Next system, up to instrument X3. The WE group was instrumented to the foramen up to instrument X5, and the NE group was instrumented 1 mm lower. The canals were obturated 1 mm below the apical foramen with gutta-percha and AH Plus and stored for 7 days at 37 °C and 95% humidity. Roots were fixed in microtubes filled with 1.5% agar gel. The obturation material was removed with Reciproc R50. Scans of the teeth and agar were performed using micro-CT and CBCT. Comparison between groups and between methods was performed using Mann-Withney test (p ≤0.05). RESULTS: No statistical difference was found when comparing the extruded material between groups using micro-CT (p = 0.589) or CBCT (p = 0.953). CBCT measured a greater volume of extruded material than micro- CT (p = 0.0004). CONCLUSION: Foraminal widening had no effect on the extrusion of filling material during retreatment. The CBCT favored the evaluation of apically extruded filling material.

Age Determination in Children Using Camirere's Indian Specific Formula: A Radiographic Study Using Orthopantomographs.

AIM: Determination of age is a pivotal part of forensic dentistry. Since many dental age determination methods are invasive, Cameriere introduced a radiographic method where age evaluation was carried out using an orthopantomogram (OPG). An adaptation of the same formula was later formulated by Rai et al. for the Indian population. The aim of the study was to assess the age and to dictate the efficiency of the Indian version of Cameriere's formula in the Chennai subpopulation. MATERIALS AND METHODS: This study consisted of radiographs belonging to 50 individuals with an age range of 5-15 years. Radiographs were taken using the OPG and the soft copies obtained were analyzed. The variables such as seven left and right permanent mandibular teeth and the number of teeth with closed apical, and with open apical, ends of roots were examined and measured. The obtained data, after substituting in the formula was statistically analyzed using paired and unpaired t-test and Pearson's correlation coefficient test. RESULTS: On comparing dental age and chronological age, statistically significant results were obtained on both sides of the radiograph. Between genders, both sides of the radiograph showed non-significant results. On correlating the sides, the left side showed greater accuracy in age determination compared to the right side of the OPG. CONCLUSION: Age estimation using Indian-specified formula provides a near good estimate and hence can be a reliable method to measure the chronological age of the participants. CLINICAL SIGNIFICANCE: The Indian version of the Cameriere's formula can be used as a rational tool to assess the age of young children and adolescents.

Influence of Open Apex on Working Length Determination Using Cone-Beam Computed Tomography and Apex Locators: A Comparative In Vitro Study.

Objectives: The aim of this study is to assess the effect of open apex on working length (WL) determination with aid of cone-beam computed tomography (CBCT) and electronic apex locators (EALs). Methods: Thirty-two extracted human mandibular premolars were selected, and apical 5 mm was removed. Root canals were prepared from the apical to the coronal direction of the canal using peeso reamers up to size 5 (retrograde) to simulate open apex. The samples were analyzed by CBCT, and WL was established (CWL) by a radiologist. An endodontist prepared the access cavities, and visual working length (VWL) was recorded. The samples were embedded in a freshly mixed alginate mould up to cementoenamel junction. Each root canal length was measured with two different EALs-Root ZX mini and i Root. The measurements were repeated 3 times by using a digital caliper, and the mean was recorded by the endodontist who was blinded to the results of the CWL. The recorded data was statistically analyzed using the SPSS software. Results: The results of this study showed statistically significant difference between VWL and i Root, CWL and i Root, and Root ZX mini and i Root (p < 0.05). Amongst EALs, a superior accuracy was noted for Root ZX mini than as compared to i Root. However, no statistically significant difference was seen between Root ZX mini and CWL (p > 0.05). Conclusion: The present study showed that CWL is as accurate and reliable as VWL which is the gold standard. Amongst EALs, Root ZX mini performed more accurately than i Root. Preexisting CBCT scans should be used as an advantage in determining WL.

Micro-CT Study of the In Vivo Accuracy of a Wireless Electronic Apex Locator.

INTRODUCTION: This study aimed to compare the in vivo accuracy of Wirele-X and RootZX II electronic apex locators (EALs) in determining the position of the major foramen using micro-computed tomography (micro-CT) as the analytical tool. METHODS: Eleven vital teeth planned for extraction from 5 patients were used. After conventional access cavity preparation, root canals were flared and negotiated up to the apical third with sizes 08 and 10 K-files followed by irrigation with 2.5% NaOCl. K-type files were used to determine the working length of the selected canals using Root ZX II and Wirele-X apex locators until their numeric displays read "0.0." After fixing the silicon stop to the file, teeth were extracted and imaged in a micro-CT device using a double-scan protocol. Image stacks, with and without the file in the root canal, were then co-registered and the measurement error calculated as the absolute difference between the tip of the file and the major foramen. Positive and negative values were recorded when the file tip was detected beyond or short of the major foramen, respectively. Accuracy was determined on stable measurements within ± 0.5 mm when the file tip did not extend beyond the major foramen. The χ2 test was applied to compare the ability of the EALs to detect the position of the major foramen, and the t test for dependent variables was used to verify differences in the 2 measurements obtained in each tooth. Significance level was set at 5%. RESULTS: Within a tolerance level of ± 0.5 mm, no significant differences were observed between the tested EALs regarding the absolute distance values (P = .82) or in their ability to detect the position of the major foramen (χ2 = 0.2588; P = .6109). The accuracy of the Root ZX II and the Wirele-X apex locators within ± 0.5 mm were 81.8% and 90.9%, respectively. CONCLUSIONS: Root ZX II and Wirele-X performed similarly regarding the in vivo detection of the major foramen. Using strict criteria, the accuracy of the Root ZX II and the Wirele-X apex locators were 81.8% and 90.9%, respectively.

Are electronic apex locators accurate in determining working length in primary teeth pulpectomies? A systematic review and meta-analysis of clinical studies.

BACKGROUND: The lack of a well-defined apical constriction in primary teeth raises concerns regarding the accuracy of electronic apex locators (EALs) for measuring working length. OBJECTIVES: To evaluate the accuracy of EALs in determining working length in primary teeth pulpectomies. METHODS: Two reviewers searched ten databases up to September 2021. Clinical studies evaluating the accuracy of the electronic measurement of working length in primary teeth pulpectomies were included. Studies without a comparison group, with samples smaller than ten root canals, and that did not use a multiple frequency EAL were excluded. A meta-analysis was conducted to assess the paired differences in mean lengths between measurements obtained by electronic and comparative methods. In addition, a meta-analysis of proportion was applied according to the level of difference between the measures. The risk of bias and applicability of the studies were assessed using the QUADAS-2 tool. The certainty of evidence was assessed with the Grading of Recommendations, Assessment, Development and Evaluation (GRADE) approach. RESULTS: Twenty-nine studies were included in the qualitative analysis and twenty-three in the quantitative analysis. The methods of comparison for the electronic measurement were the radiographic method, radiovisiographic, scanning electron microscopy, and direct visualization. The meta-analysis showed that the electronic measurement tends to be shorter than radiographic measurement, while the other methods showed no difference. The proportion analysis showed a higher pooled proportion of difference values between electronic and comparative measurements within -0.5 to +0.5 mm (69.31%). The certainty of the evidence suggested very low confidence in estimating the outcome. DISCUSSION: The results of this review denote a good performance of the EALs in determining working length in primary teeth pulpectomies. However, these results are based on clinical studies with low methodological quality and high heterogeneity, which require careful interpretation for clinical practice. CONCLUSIONS: Although the results suggest acceptable accuracy of EALs in determining working length in primary teeth pulpectomies, the low quality of the included studies and the very low certainty of the evidence require clinicians to interpret these results with caution. More robust evidence is required to support that these devices are accurate for primary teeth. REGISTRATION: CRD42021277414 (PROSPERO).

Radiographic outcomes and prognostic factors in nonvital immature permanent teeth after apexification with modified calcium hydroxide paste: a retrospective study.

OBJECTIVE: To assess the radiographic outcomes and prognostic factors in nonvital immature permanent teeth after apexification with modified calcium hydroxide paste. MATERIALS AND METHODS: Clinical and radiographic data were collected from 115 necrotic immature permanent teeth (71 caused by trauma and 44 caused by dens evaginatus) treated with apexification using a modified calcium hydroxide. Postoperative root morphology and changes in radiographic root area (RRA) on periapical radiographs were determined and statistically evaluated. Regression analysis was performed to identify factors associated with the outcomes of apexification. RESULTS: The average time for a calcified barrier formation was 10.66 ± 6.37 months. The root morphology after apexification with calcium hydroxide + iodoform paste was similar to that previously described after calcium hydroxide apexification. Compared with the trauma cases, the dens evaginatus cases revealed more type I (40.91% vs 16.9%) and less type II morphology (45.45% vs 67.61%). Although the changes in RRA were limited, the dens evaginatus cases showed greater increment of RRA than the trauma cases (4.12% ± 5.58% vs 0.70% ± 5.21%, P < 0.001). A significant association was found between the preoperative stage of root development and postoperative percentage change in RRA (P < 0.001). CONCLUSIONS: Teeth caused by dens evaginatus had better outcomes after apexification than teeth caused by trauma. Early stages of root development were associated with superior radiographic outcomes. CLINICAL RELEVANCE: Apexification provided reliable outcomes in the treatment of immature teeth with pulp necrosis and apical periodontitis, even though the root development is limited. Treatment decision should be made with comprehensive evaluation of prognostic factors.

Morphological changes of the root apex in anterior teeth with periapical periodontitis: an in-vivo study.

INTRODUCTION: The aim was to analyze the morphological changes of root apex in anterior teeth with periapical periodontitis. METHODS: 32 untreated anterior teeth with periapical periodontitis were enrolled, compared with the healthy contralateral teeth. Two-dimensional measurement of Cone-beam computed tomography was used to determine the location and measure diameter of the apical constriction according to Schell's methods. An open-source software (3D Slicer) was used to reconstruct the teeth. The apical constriction form was analysis according to Schell's topography. The distances of apical constriction to apical foramen and anatomical apex were measured respectively. RESULTS: The difference value between buccolingual and mesiodistal diameter was (0.06 ± 0.09) mm and (0.04 ± 0.04) mm in periapical periodontitis and controls (p < 0.05). The mean distance between apical constriction and anatomical apex was significantly shorter in periapical periodontitis than controls, so was the mean distance of apical constriction to apical foramen. The most common form of apical constriction was flaring (65.6%) in periapical periodontitis. CONCLUSIONS: The anterior teeth with periapical periodontitis had shorter distances of apical constriction to anatomical apex and apical foramen, bigger disparities between the diameters of buccolingual and mesiodistal, and higher proportion of flaring apical constriction.

Radiographic differences observed following apexification vs revascularization in necrotic immature molars and incisors: a follow-up study of 18 teeth.

PURPOSE: To evaluate the effectiveness of apexification versus revascularization in the treatment of necrotic immature teeth and determine which strategy affords the greatest radiological success rate. METHODS: An analysis was made of 18 teeth subjected to mineral trioxide aggregate (MTA) apical plugging and regenerative endodontic treatment, assessing healing of the apical lesions and the changes in root dimensions. RESULTS: Significantly greater root growth was observed with revascularization in terms of the percentage change in length (12.75% at 6 months) and dentin thickness (34.57% at 6 months) (p < 0.05). There were no significant differences between the two treatments in terms of the apical healing scores after 6 months of follow-up (p > 0.05). CONCLUSION: Apexification with an MTA apical plug and pulp regeneration are reliable treatments for non-vital immature teeth. The radiographic outcomes are comparable between the immature teeth subjected to MTA apexification versus those subjected to revascularization. The results of the present study indicate a greater increase in root length and width with regenerative endodontic treatment.

Effectiveness of MTA apical plug in dens evaginatus with open apices.

BACKGROUND: The present study aims to evaluate the effectiveness of mineral trioxide aggregate (MTA) application in treating dens evaginatus affected teeth with apical lesions and open apices using haemostatic collagen membrane to prevent the apical extrusion of MTA. METHODS: Twelve patients with 14 dens evaginatus affected teeth with apical lesions and open apices were treated with MTA apical plug and haemostatic collagen membrane. Clinical symptoms of subjective pain, pain of palpation, percussion, sinus tract, and the apical lesions' radiographic parameter were recorded at every 3-month interval up to 9 months after treatment. Paired t-test or Wilcoxon signed-rank test was used for statistical analysis with P < 0.05 as the threshold for considering results to be statistically significant. RESULTS: No patient experienced clinical symptoms 3 months after endodontic treatment. In addition, there was a significant difference in the dimensions of the apical lesions' before compared to 3 months after endodontic treatment. CONCLUSIONS: The combination of MTA apical plug and haemostatic collagen membrane effectively treated dens evaginatus affected teeth with apical lesions, and open apices.

Prevalence of Short Root Anomaly in a Group of Puerto Ricans.

OBJECTIVE: To estimate the prevalence of short root anomaly (SRA) in a group of Puerto Ricans at the Advanced Education Program in Orthodontics of the University of Puerto Rico. METHODS: A cross-sectional study was conducted with digital panoramic x-rays of 203 patients (112 females and 91 males; mean age: 17 years) in Puerto Rico. Utilizing the modified Lind's method, 406 maxillary right and left central incisors (1) were measured and evaluated for SRA. Root and crown length and R/C ratio were compared by sex and side. Linear regression was used to evaluate the associations between the R/C ratio and age, sex, and side (right/left). All the statistical analyses were evaluated using significance level of .05 (2). RESULTS: The prevalence of SRA was 0.49%. The average root and crown lengths for the maxillary right and left central incisors were 19.47 and 10.28 mm, respectively. Sex was associated with root and crown length, not with the R/C ratio. No differences were observed in the R/C ratio by the side. There were no significant associations between age, sex, and side and R/C ratio in the multivariate analysis. CONCLUSION: The prevalence of SRA in our population is lower than any reported in the literature. The R/C ratio in our Hispanic population was the highest compared with those of other ethnicities. Neither the sex nor the side of the incisor was associated with the R/C ratio. These findings are contrary to those of prior reports stating that males have higher R/C ratios than females.

Radiographic and electronic working length comparison. An in vivo study of three Electronic Apex Locator devices.

The aim of this study is to compare the working length measured with Root ZX (EAL1), Propex II (EAL2) and Endo Analyzer Model 8005 (EAL3) with radiographic measurements during endodontic treatment. Fifty single canal teeth scheduled for endodontic treatment were selected for the study. After endodontic access preparation, pulp chamber was irrigated with 5mL of 5% sodium hypochlorite (NaOCl). The canal was scouted with a size 10 K-file introduced slightly over the apex to verify the canal patency. The working length (WL) was measured using all three EAL devices and radiographically. All measured working lengths were recorded and compared using ANOVA for repeated measures considering the multiple comparison of paired data Least Significant Difference (LSD). The WL mean values for EAL1 were 19.1 ± 1.7 mm; for EAL2 were 19.4 ± 1.7; for EAL3 were 19.4 ± 1.6 and for RG were 19.2 ± 1.7. The Pearson correlation coefficients indicated that the following correlation between electronic devices and radiographic WL: EAL1- 0.986, EAL2- 0.953 and EAL3- 0.931. Considering the mean values compared to radiographic measures, Root ZX gave better results than the other tested EAL devices. Endo Analyzer Model 8005 showed the worst performance.

Use of Mineral Trioxide Aggregate with or without a Collagen Sponge as an Apical Plug in Teeth with Immature Apices.

OBJECTIVE: This retrospective study aimed to evaluate the clinical outcomes of the apical plug performed using MTA with or without collagen sponge in immature anterior maxillary teeth with necrotic pulp. STUDY DESIGN: The study included apical obturation of 20 upper incisor teeth from 18 patients and outcomes of 12-month follow-up. The teeth were divided into 2 groups with 10 cases in each group according to the apexification protocol (Group 1; apical plug with MTA, Group 2; collagen sponge and apical plug with MTA). The artificial apical barrier, approximately 4-mm-thick, was created with MTA in each group. Based on clinical and radiographic criteria, the outcome was assessed using the periapical index (PAI) by 2 calibrated investigators. RESULTS: In this study, 3 of the 6 teeth (50%) in Group 1 and 5 of the 8 teeth (62.5%) in Group 2 healed at the 12-month follow-up. However, there was no statistically significant difference between the groups at the post-treatment follow-up times. CONCLUSION: The use of collagen as an apical matrix prior to the MTA plug can be suggested due to favorable clinical outcomes.